Fuente de alimentación de carga del condensador de alto voltaje de alta precisión

Input

Voltage

Three-phase 380Vac (input tolerance: 10%)

Frequency

50Hz/60Hz

Connection

Input line provided by iDealTek. (1.5 meters)

Output

Rated power

3KW ~ 6KW (Max.) available **

Output voltage adjusting range

1KV / 2KV / 3KV / 4KV / 5KV / 6KV / 8KV / 10KV / 12KV / 15KV / 20KV / 30KV / 40KV / 50KV / 60KV / 70KV / 80KV / 100KV available **

(For other output voltages, please contact us for details)

Output current adjusting range

0A ~ ****mA

Output polarity

Positive or Negative (both available)

Client must choose one output polarity before ordering.

Line regulation

≤0.1% for ±10% change in input voltage.

Load regulation

≤0.1% for no load to full load at output.

Ripple (Vr.m.s.)

≤0.1% @ rated output.

Output connection

Detachable shielded high-voltage cable provided by IdealTek. (3 meters)

Efficiency

≥90%

Setting & Display

Output control mode

Local

10-turn potentiometer on front panel.

Remote

DB50 analog port & RS485 communication port.

Display mode

Display mode

4¹/₂ LED digital display

Display resolution

≤1% (range: 5%~100% of the rated value)

Protection & Monitoring functions

Load discharging protection

When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.

Short circuit protection

When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.

Over current protection

When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.

Noise

≤65dB

Protection degree

IP20

Cooling method

Forced air cooling (Front inlet, rear outlet)

Working environment conditions

Ambient temperature

0℃～40℃

Humidity

10%～90% (non-condensing)

Height

≤2000m

Storage environment conditions

Ambient temperature

-20℃～60℃

Humidity

10%～90%(non-condensing)

Height

≤2000m

Size (W*H*D) (mm)

483*266*573

（19” sub-rack 6U chassis）

Weight

45KG (1KV ~ 10KV)

55KG (20KV ~ 100KV)

Front panel description

No.

Description

1

Power Switch (POWER)

2

HV ON / OFF Switch (HV)

3

Local / Remote Switch (LOCAL / REMOTE)

4

Analog / RS communication Switch

5

HV adjusting knob

6

Current adjusting knob

7

HV output display

8

Output current display

9

Emergency Button

10

Reset switch

Front Panel Indicator Lights Description

Indicator lights name

Description

POWER ON

After the CONTROL POWER switch is set to the ON position, the light becomes on, indicating that the power input has been connected and the power supply is normal.

HV ON

After the HV switch is set to the ON position, the light becomes on, indicating that the high-voltage output of the power supply is started and the power supply is normal.

CONST HV

When the light is on, it indicates that the power supply is working in a constant voltage state.

CONST mA

When the light is on, it indicates that the power supply is working in a constant current state.

CONST POW

When the light is on, it indicates that the power supply is working in a constant power state.

OVER VOLTAGE

When the light is on, it indicates that the power supply has a high voltage overvoltage fault.

INV OVERI

This light is on, indicating that the power supply has an inverter overcurrent fault.

INV OVER TEMP

This light is on, indicating that the power supply has an inverter over-temperature fault.

HV OVER TEMP

When the light is on, it indicates that the power supply has an over-temperature fault with the high-voltage part.

SPARK EXCEEDED

When the light is on, it indicates that the power supply has a discharge fault.

AC FAULT

When the light is on, it indicates that there is an AC fault (overvoltage or under voltage) fault in the power supply.

EMERGENCY

When the light is on, it indicates that the power supply is in an emergency stop state with faults.

INTERLOCK

When the light is on, it indicates that the power supply is in an interlocked state and the power supply is normal.

Rear panel description

Mark

Description

E1

Grounding bolt

J1

HV output interface

JB1

DB50 control interface

CB1

Main power switch

LINE INPUT

Power Supply input interface

Three – phase, four – wire (L1 è Black, L2 è Red, L3 è Grey, Null è Blue, PE è Green)

AIR EXHAUST

Cooling fans

KV

mA

P (KW)

Model

KV

mA

P (KW)

Model

1

6000

6

CCP-(N/P)6kW-1kV

15

400

6

CCP-(N/P)6kW-15kV

2

3000

6

CCP-(N/P)6kW-2kV

20

300

6

CCP-(N/P)6kW-20kV

3

2000

6

CCP-(N/P)6kW-3kV

30

200

6

CCP-(N/P)6kW-30kV

4

1500

6

CCP-(N/P)6kW-4kV

40

150

6

CCP-(N/P)6kW-40kV

5

1200

6

CCP-(N/P)6kW-5kV

50

120

6

CCP-(N/P)6kW-50kV

6

1000

6

CCP-(N/P)6kW-6kV

60

100

6

CCP-(N/P)6kW-60kV

8

750

6

CCP-(N/P)6kW-8kV

70

86

6

CCP-(N/P)6kW-70kV

10

600

6

CCP-(N/P)6kW-10kV

80

75

6

CCP-(N/P)6kW-80kV

12

500

6

CCP-(N/P)6kW-12kV

100

60

6

CCP-(N/P)6kW-100kV

Dibujos (solo para referencia)

Chasis 6U ( (2kw ) (RAL7035)